Brilliant! Posted January 30, 2014 Report Share Posted January 30, 2014 The Olympic rings were heat-pressed felt on the shoulder. The same material that you'd find on the older Tackla IIHF jerseys. Quote Link to comment Share on other sites More sharing options...
SuperTheGreat Posted January 31, 2014 Report Share Posted January 31, 2014 Here's Keener's Sundin jersey and Jeff's blog post So, they both look totally different. Jeff's looks like embroidered all the way around and Keener's looks like it could be either embroidered or pressed felt cutouts or any combination of both. Jeff's looks to be a replica, though. Should get info from Keener on his shoulder. Quote Link to comment Share on other sites More sharing options...
Brilliant! Posted January 31, 2014 Report Share Posted January 31, 2014 I had a game jersey from that tournament a few years back. The rings were heat-pressed felt. Another interesting trait was that the Nike logo on the neck hem was covered up by blue air-knit fabric. I have no idea why but it's just another wrinkle. Quote Link to comment Share on other sites More sharing options...
guam64 Posted January 31, 2014 Report Share Posted January 31, 2014 I had a game jersey from that tournament a few years back. The rings were heat-pressed felt. Another interesting trait was that the Nike logo on the neck hem was covered up by blue air-knit fabric. I have no idea why but it's just another wrinkle. I think it's because IOC rules only allow for the manufacturer's logo to appear only once on the jersey. Quote Link to comment Share on other sites More sharing options...
SuperTheGreat Posted January 31, 2014 Report Share Posted January 31, 2014 I had a game jersey from that tournament a few years back. The rings were heat-pressed felt. Another interesting trait was that the Nike logo on the neck hem was covered up by blue air-knit fabric. I have no idea why but it's just another wrinkle. Hmm. That's pretty cool. I like that type of unique aspect. Makes me more excited to have it done up. So, what about the crowns and the "SWE"? Same? Ed: Must be. Quote Link to comment Share on other sites More sharing options...
pac_4_ever Posted March 4, 2014 Report Share Posted March 4, 2014 Hey guys need some help. Have a 1996 Team Canada World Cup of Hockey jersey (white) made by Bauer. Is it the Bauer Flo-knit material I need for this nameplate? Also have a 2002 Team Canada Nike Olympic jersey (white) and need Nike Flo-knit for this one as well? Help me out if somebody can. Quote Link to comment Share on other sites More sharing options...
Brilliant! Posted March 4, 2014 Report Share Posted March 4, 2014 I could probably supply both as long as the name length is reasonable. Quote Link to comment Share on other sites More sharing options...
pac_4_ever Posted March 4, 2014 Report Share Posted March 4, 2014 ^ 96 length is for GRETZKY, and the 02 length is for LEMIEUX. I am also looking for nameplates for the both home and away 98 Team Canada Jerseys (Bauer). Check PM's Brilliant! Quote Link to comment Share on other sites More sharing options...
flyerz_freak Posted March 10, 2014 Report Share Posted March 10, 2014 What is the nameplate material used on the 1996-1999 Boston Bruins Alternate 'Pooh Bear" jerseys? I am going to customize this jersey with Bourque and want to make sure I order the correct material. Thanks! Quote Link to comment Share on other sites More sharing options...
Mnwildfan7000 Posted March 14, 2014 Report Share Posted March 14, 2014 Need some authentic airknit black and white plates. 24"x5" preferred. 5" so I can surge the edges on the length. Quote Link to comment Share on other sites More sharing options...
LAK74 Posted March 14, 2014 Report Share Posted March 14, 2014 JerseyBaron has both colors- the description says 24" x 4" though. The one I bought was actually more like 4.25". Plenty of room for the edges to be serged, at least with the letter size I used it for. http://stores.ebay.com/The-Jersey-Baron/JERSEY-NAMEPLATE-/_i.html?_fsub=670991019&_sid=26129609&_trksid=p4634.c0.m322 Quote Link to comment Share on other sites More sharing options...
LAKOTTA Posted March 14, 2014 Report Share Posted March 14, 2014 question... how many nameplates can you get out of a white, Reebok, airknit, size 56 jersey? thanx..ken Quote Link to comment Share on other sites More sharing options...
HockeyMusic Posted March 27, 2014 Report Share Posted March 27, 2014 (edited) Anyone need any 2010 Team Canada olympic jersey nameplates?? They fit any name except for Niedermayer (I checked the roster and there is no name more than eight letters except for him) The large piece will actually accommodate one nameplate since the stitch holes from the Canada crest do not iron out, so you will still see them if cut horizontally. You can get one nameplate if you cut it out going down the middle. Send me a PM if interested......$10 each shipping included. Edited March 27, 2014 by HockeyMusic Quote Link to comment Share on other sites More sharing options...
pac_4_ever Posted April 1, 2014 Report Share Posted April 1, 2014 (edited) ^ @HockeyMusic check your PM are they the authentic swift material or the nike replica material? Edited April 1, 2014 by pac_4_ever Quote Link to comment Share on other sites More sharing options...
Mnwildfan7000 Posted April 3, 2014 Report Share Posted April 3, 2014 I need 4 black airknit nameplates. 24x5 (inches) no surged edge! Quote Link to comment Share on other sites More sharing options...
pac_4_ever Posted April 6, 2014 Report Share Posted April 6, 2014 Hey guys I need some help. Does anybody have a nameplate or material for a nameplate for a 2003-04 Atlanta Thrashers Koho alternate jersey (the powder blue one)? I need a nameplate or material for a nameplate long enough to accommodate for KOVALCHUK. Check this image if you are unsure which jersey I am talking about. I believe the Koho jersey from 03-04 is the same material as the 05-06 and 06/07 RBK pre edge for the same jersey so the material can actually come from any of those jerseys from those 3 seasons I have listed. Quote Link to comment Share on other sites More sharing options...
shandy_man Posted April 29, 2014 Report Share Posted April 29, 2014 On the hunt for a Midnight Blue/Navy ultrafil nameplate that the Canucks would have worn. Trying to fit Kariya onto the plate.Thanks! Quote Link to comment Share on other sites More sharing options...
aroomadoomie Posted May 4, 2014 Report Share Posted May 4, 2014 Anyone need navy edge material? About to sacrifice a jersey and would like to get the most I can out of it Quote Link to comment Share on other sites More sharing options...
thebiggoalie Posted May 19, 2014 Report Share Posted May 19, 2014 In need of edge nameplate material for a Bruins Winter Classic jersey ASAP. Out of curiosity, is it the same color gold as Nashville's home jerseys? Quote Link to comment Share on other sites More sharing options...
dsl135 Posted June 16, 2014 Report Share Posted June 16, 2014 I'm looking for some white EDGE material, long enough for Roenick on a Sharks jersey. Quote Link to comment Share on other sites More sharing options...
cjerina Posted June 16, 2014 Report Share Posted June 16, 2014 Can anyone verify that the EDGE nameplates that Jersey Baron has have a height of ~4.5"? He states they are approximately 4", but the plate that I am trying to replicate is 4.5" tall. Not sure if 1/2" is just rounding or it is definitely shorter. Quote Link to comment Share on other sites More sharing options...
thebiggoalie Posted June 16, 2014 Report Share Posted June 16, 2014 Can anyone verify that the EDGE nameplates that Jersey Baron has have a height of ~4.5"? He states they are approximately 4", but the plate that I am trying to replicate is 4.5" tall. Not sure if 1/2" is just rounding or it is definitely shorter. I recently picked up a plate from him. It measures 4.5" total, 4" between the serged inside edges. Quote Link to comment Share on other sites More sharing options...
cjerina Posted June 16, 2014 Report Share Posted June 16, 2014 I recently picked up a plate from him. It measures 4.5" total, 4" between the serged inside edges. Perfect, thank you! Quote Link to comment Share on other sites More sharing options...
aroomadoomie Posted June 19, 2014 Report Share Posted June 19, 2014 I'm looking for some white EDGE material, long enough for Roenick on a Sharks jersey. I have a white one was was gonna use it but the jersey got out on hold Quote Link to comment Share on other sites More sharing options...
aroomadoomie Posted July 5, 2014 Report Share Posted July 5, 2014 (edited) i have 5 navy nameplates all serged, all 4.5 inches tall, one is 18.5", 3 are 13.5" and 1 is 11", looking for 15$ for the bugger ones or 10$ for the small one Edited July 14, 2014 by aroomadoomie Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.