Sign in to follow this  
Followers 0
Brilliant!

Folding your jerseys

25 posts in this topic

So you've sold a hockey jersey on eBay. Great! Now what? How do I get the jersey to the buyer without the crests and/or numbers creasing? I'm sure that everyone of us has come across this problem at some time or another whether it be as a buyer or a seller. Nobody wants to open the package and find a big old dent through their Habs logo or along the 8 on the back of their Caps jersey. Well, I'm gonna show you how to fold your jerseys properly into a neat little package WITHOUT fear or any creases or folds. Ready? Here we go!

Step 1: Select your jersey(yes, this is the first step! What if you chose the wrong jersey for shipment? Then you're in big trouble.).

step1-vi.jpg

Step 2: Lay your jersey face down on its front with the arms stretched out to the sides.

step2-vi.jpg

Step 3: Take either one of the arms and fold it in across the back going all the way to the other arms seam. If your jersey is tagged, bring the arm over until you get to the first portion of the number, making sure the numbers stay flat.

step3-vi.jpg

Step 4: Take the other arm and do the same; folding it across the back until reaching the seam OR the edge of the number. By now, you should have a rectangular shape with all your numbers lying flat.

step4-vi.jpg

Step 5: Find the small portion of material at the very edge of the jersey. Take about two inches of this small piece and fold it over into the jersey, again making sure that your numbers are still flat.

step5-vi.jpg

Step 6: Do the exact same thing on the other side of the jersey. Fold in just enough so you get right to the edge of the number.

step6-vi.jpg

Step 7: Next, take the top portion of the jersey and fold it up onto the back, using either the front crest or the back numbers as a guide. Bring it up enough to just see the edge of either. Obviously, in cases of smaller crests, use your judgement.

step7-vi.jpg

Step 8: Finally, fold this piece up again evenly with the rest of the jersey that's left. This will ensure that your crest is now relatively centered and flat while the numbers also remain flat in the back.

step8-vi.jpg

There you go! You're ready to ship that baby without any mishaps along the way.

0

Share this post


Link to post
Share on other sites

Wait, what? What about jerseys with shoulder crests you say? I got you covered!

Step 1: The procedure is basically the same with a few differences.

DSC00983-vi.jpg

Step 2: This time, when folding the arms, bring it to the edge of the shoulder crest.

DSC00984-vi.jpg

Step 3: Do the same with the other arm, folding to the edge of the crest.

DSC00985-vi.jpg

Step 4: Now, using the crest as a guide, fold the small portion in so the entire crest is inside the fold but still remaining flat.

DSC00986-vi.jpg

Step 5: Repeat the same on the other side, making sure the crests are still flat.

DSC00987-vi.jpg

Step 6: Grabbing the shoulder crest portions in your hands, fold upward to the edge of the chest crest.

DSC00988-vi.jpg

Step 7: Even up your last fold and you are good to go.

DSC00989-vi.jpg

There you have it. Using this method will give your customers one less thing to complain about. I've been doing this since I sold my first jersey and I haven't had one complaint about a creased crest. Now, go forth and impart this knowledge on others!

0

Share this post


Link to post
Share on other sites

As elementary as this post seems, it is good info for those people who like to fold jerseys up incorrectly so that the fit into the "small" sized USPS Priority Mail boxes... I HATE when I receive a jersey that has been all mashed up to fit into one of those tiny boxes. And don't even get me started on the folks who ship jerseys in bags rather than boxes... :fight:

Paul

www.PensJerseys.com

0

Share this post


Link to post
Share on other sites

Thanks for this thread -- very handy!

Now -- can anyone point me to some instructions for how to fold jerseys for presentation? I see all you guys taking great photos of well-folded jerseys primed for display -- whereas the jerseys in my photos are a wrinkled, crooked mess. Any tips?

0

Share this post


Link to post
Share on other sites

Thanks for this thread -- very handy!

Now -- can anyone point me to some instructions for how to fold jerseys for presentation? I see all you guys taking great photos of well-folded jerseys primed for display -- whereas the jerseys in my photos are a wrinkled, crooked mess. Any tips?

Whoa, tis a thread back from the dead... :o

That said, the more you can light your photos from above, the flatter the light, the less it will show the wrinkles. This means use an on camera flash and aim straight down at your jerseys.

If you have to use a side light, it will rake across your jersey and brighten the side of any wrinkles facing the light, and shadows on the side away from the light. That contrast will only enhance the wrinkles.

If you must use window light, put a WHITE sheet over it or close the blinds to soften the light. You can also put a sheet or white surface (art board, large white box, hang a sheet) to reflect light back into the shadow side of the shot to again even out the light as much as possible.

Your best bet is still a flash straight at the jersey.

I just fold mine down so the sleeve cuffs are near the waist, depending on the location of any shoulder patches and sleeve numbers.

Here's an example, which shows how lighting from above and shooting straight down flattens the wrinkles.

2953889080100337552S425x425Q85.jpg

0

Share this post


Link to post
Share on other sites

Does anyone know how to get creases out of numbers? I'm scared to take a iron to it...seems like a bad thing to do IMO.

0

Share this post


Link to post
Share on other sites

Turn it inside out and then iron that spot underneath a white t-shirt. That will usually get any wrinkles out of the twill. It works on dented crests too.

Holy crap, I made this almost four years ago?? Wow. I don't even have those two jerseys anymore!

0

Share this post


Link to post
Share on other sites

Does anyone know how to get creases out of numbers? I'm scared to take a iron to it...seems like a bad thing to do IMO.

Others may have better tips, but I've used an iron on "steam" setting and put a t-shirt between the iron and the jersey. I also normally try to iron from the inside of the jersey first to see if that works. The t-shirt is key as you don't want to burn the twill of the numbers.

edit: mike beat me by a minute ... I need to type faster :D

Edited by akteon
0

Share this post


Link to post
Share on other sites

Thanks guys! I let a friend borrow one of my jerseys and it came back to me folded like a regular tshirt. Thought I was about choke someone. :angry:

0

Share this post


Link to post
Share on other sites

Do you really have all of those blue thrasher sweaters?

0

Share this post


Link to post
Share on other sites

Do you really have all of those blue thrasher sweaters?

LOL Nooooo. I have Peverley, Kane and Oduya. I'll be getting Pavelec's and hopefully Burmi's next month. I'm waiting to see what Ladd does in contract talks, same with Buff.

The second jersey set are the jerseys I want. (Toby's is supposed to be his Team Sweden jersey) :)

Edited by thrashyourfacein
0

Share this post


Link to post
Share on other sites

Trevor Gillies???

0

Share this post


Link to post
Share on other sites

Trevor Gillies???

304560_o.gif

LOL. Yep.

0

Share this post


Link to post
Share on other sites

I should probably clarify what set is which in my signature anyway.

0

Share this post


Link to post
Share on other sites

Ya that Higgins you sent to me and then told mw you didnt have any pic of it!!! lol thanks Mike

No worries Higgins was sold a long time ago

0

Share this post


Link to post
Share on other sites

HA! That's the same one too! I'd say it's all your fault. You should have looked a little harder. :D

0

Share this post


Link to post
Share on other sites

As mean as Trevor Gillies looks, he is one of the nicest people I have met.

0

Share this post


Link to post
Share on other sites

Has anyone else had trouble with wrinkles/creases on the new Nike Swift authentics? I have a couple of Team Canada's that I bought and just bringing them home created a bunch of creases in the thin polyester ripstop material they use.

0

Share this post


Link to post
Share on other sites

ij.com beer's guy,

Thanks for all the photos of folding a jersey. I was having issues with this!

0

Share this post


Link to post
Share on other sites

Mike, thanks for this thread! It is very comprehensive and helpful! :thumbsup:

0

Share this post


Link to post
Share on other sites

Thanks for this guide! Very helpful!

0

Share this post


Link to post
Share on other sites

Thanks a lot for this Mike. Every purchase I've made off Meigray has had this thread's link in the special instructions box.

0

Share this post


Link to post
Share on other sites

Just wanted to thank you as well. Used and appreciated!

0

Share this post


Link to post
Share on other sites

New to this board. Been lurking for a while. Hi everyone!

This sort of thing is exactly why I signed up. Fantastic resource.

Thank you.

0

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0