Brilliant! Posted September 1, 2007 Report Share Posted September 1, 2007 So you've sold a hockey jersey on eBay. Great! Now what? How do I get the jersey to the buyer without the crests and/or numbers creasing? I'm sure that everyone of us has come across this problem at some time or another whether it be as a buyer or a seller. Nobody wants to open the package and find a big old dent through their Habs logo or along the 8 on the back of their Caps jersey. Well, I'm gonna show you how to fold your jerseys properly into a neat little package WITHOUT fear or any creases or folds. Ready? Here we go! Step 1: Select your jersey(yes, this is the first step! What if you chose the wrong jersey for shipment? Then you're in big trouble.). Step 2: Lay your jersey face down on its front with the arms stretched out to the sides. Step 3: Take either one of the arms and fold it in across the back going all the way to the other arms seam. If your jersey is tagged, bring the arm over until you get to the first portion of the number, making sure the numbers stay flat. Step 4: Take the other arm and do the same; folding it across the back until reaching the seam OR the edge of the number. By now, you should have a rectangular shape with all your numbers lying flat. Step 5: Find the small portion of material at the very edge of the jersey. Take about two inches of this small piece and fold it over into the jersey, again making sure that your numbers are still flat. Step 6: Do the exact same thing on the other side of the jersey. Fold in just enough so you get right to the edge of the number. Step 7: Next, take the top portion of the jersey and fold it up onto the back, using either the front crest or the back numbers as a guide. Bring it up enough to just see the edge of either. Obviously, in cases of smaller crests, use your judgement. Step 8: Finally, fold this piece up again evenly with the rest of the jersey that's left. This will ensure that your crest is now relatively centered and flat while the numbers also remain flat in the back. There you go! You're ready to ship that baby without any mishaps along the way. Quote Link to comment Share on other sites More sharing options...
Brilliant! Posted September 1, 2007 Author Report Share Posted September 1, 2007 Wait, what? What about jerseys with shoulder crests you say? I got you covered! Step 1: The procedure is basically the same with a few differences. Step 2: This time, when folding the arms, bring it to the edge of the shoulder crest. Step 3: Do the same with the other arm, folding to the edge of the crest. Step 4: Now, using the crest as a guide, fold the small portion in so the entire crest is inside the fold but still remaining flat. Step 5: Repeat the same on the other side, making sure the crests are still flat. Step 6: Grabbing the shoulder crest portions in your hands, fold upward to the edge of the chest crest. Step 7: Even up your last fold and you are good to go. There you have it. Using this method will give your customers one less thing to complain about. I've been doing this since I sold my first jersey and I haven't had one complaint about a creased crest. Now, go forth and impart this knowledge on others! Quote Link to comment Share on other sites More sharing options...
Paul Posted June 14, 2010 Report Share Posted June 14, 2010 As elementary as this post seems, it is good info for those people who like to fold jerseys up incorrectly so that the fit into the "small" sized USPS Priority Mail boxes... I HATE when I receive a jersey that has been all mashed up to fit into one of those tiny boxes. And don't even get me started on the folks who ship jerseys in bags rather than boxes... Paul www.PensJerseys.com Quote Link to comment Share on other sites More sharing options...
carsoni4 Posted January 18, 2011 Report Share Posted January 18, 2011 Thanks for this thread -- very handy! Now -- can anyone point me to some instructions for how to fold jerseys for presentation? I see all you guys taking great photos of well-folded jerseys primed for display -- whereas the jerseys in my photos are a wrinkled, crooked mess. Any tips? Quote Link to comment Share on other sites More sharing options...
JeffB Posted January 18, 2011 Report Share Posted January 18, 2011 Thanks for this thread -- very handy! Now -- can anyone point me to some instructions for how to fold jerseys for presentation? I see all you guys taking great photos of well-folded jerseys primed for display -- whereas the jerseys in my photos are a wrinkled, crooked mess. Any tips? Whoa, tis a thread back from the dead... That said, the more you can light your photos from above, the flatter the light, the less it will show the wrinkles. This means use an on camera flash and aim straight down at your jerseys. If you have to use a side light, it will rake across your jersey and brighten the side of any wrinkles facing the light, and shadows on the side away from the light. That contrast will only enhance the wrinkles. If you must use window light, put a WHITE sheet over it or close the blinds to soften the light. You can also put a sheet or white surface (art board, large white box, hang a sheet) to reflect light back into the shadow side of the shot to again even out the light as much as possible. Your best bet is still a flash straight at the jersey. I just fold mine down so the sleeve cuffs are near the waist, depending on the location of any shoulder patches and sleeve numbers. Here's an example, which shows how lighting from above and shooting straight down flattens the wrinkles. Quote Link to comment Share on other sites More sharing options...
thrashyourfacein Posted January 20, 2011 Report Share Posted January 20, 2011 Does anyone know how to get creases out of numbers? I'm scared to take a iron to it...seems like a bad thing to do IMO. Quote Link to comment Share on other sites More sharing options...
Brilliant! Posted January 20, 2011 Author Report Share Posted January 20, 2011 Turn it inside out and then iron that spot underneath a white t-shirt. That will usually get any wrinkles out of the twill. It works on dented crests too. Holy crap, I made this almost four years ago?? Wow. I don't even have those two jerseys anymore! Quote Link to comment Share on other sites More sharing options...
akteon Posted January 20, 2011 Report Share Posted January 20, 2011 (edited) Does anyone know how to get creases out of numbers? I'm scared to take a iron to it...seems like a bad thing to do IMO. Others may have better tips, but I've used an iron on "steam" setting and put a t-shirt between the iron and the jersey. I also normally try to iron from the inside of the jersey first to see if that works. The t-shirt is key as you don't want to burn the twill of the numbers. edit: mike beat me by a minute ... I need to type faster Edited January 20, 2011 by akteon Quote Link to comment Share on other sites More sharing options...
thrashyourfacein Posted January 20, 2011 Report Share Posted January 20, 2011 Thanks guys! I let a friend borrow one of my jerseys and it came back to me folded like a regular tshirt. Thought I was about choke someone. Quote Link to comment Share on other sites More sharing options...
nogoal99 Posted January 20, 2011 Report Share Posted January 20, 2011 Do you really have all of those blue thrasher sweaters? Quote Link to comment Share on other sites More sharing options...
thrashyourfacein Posted January 20, 2011 Report Share Posted January 20, 2011 (edited) Do you really have all of those blue thrasher sweaters? LOL Nooooo. I have Peverley, Kane and Oduya. I'll be getting Pavelec's and hopefully Burmi's next month. I'm waiting to see what Ladd does in contract talks, same with Buff. The second jersey set are the jerseys I want. (Toby's is supposed to be his Team Sweden jersey) Edited January 20, 2011 by thrashyourfacein Quote Link to comment Share on other sites More sharing options...
guam64 Posted January 20, 2011 Report Share Posted January 20, 2011 Trevor Gillies??? Quote Link to comment Share on other sites More sharing options...
thrashyourfacein Posted January 20, 2011 Report Share Posted January 20, 2011 Trevor Gillies??? LOL. Yep. Quote Link to comment Share on other sites More sharing options...
thrashyourfacein Posted January 20, 2011 Report Share Posted January 20, 2011 I should probably clarify what set is which in my signature anyway. Quote Link to comment Share on other sites More sharing options...
sungod661 Posted January 20, 2011 Report Share Posted January 20, 2011 Ya that Higgins you sent to me and then told mw you didnt have any pic of it!!! lol thanks Mike No worries Higgins was sold a long time ago Quote Link to comment Share on other sites More sharing options...
Brilliant! Posted January 20, 2011 Author Report Share Posted January 20, 2011 HA! That's the same one too! I'd say it's all your fault. You should have looked a little harder. Quote Link to comment Share on other sites More sharing options...
NYIJM29 Posted January 20, 2011 Report Share Posted January 20, 2011 As mean as Trevor Gillies looks, he is one of the nicest people I have met. Quote Link to comment Share on other sites More sharing options...
BladesOfSteel Posted January 25, 2011 Report Share Posted January 25, 2011 Has anyone else had trouble with wrinkles/creases on the new Nike Swift authentics? I have a couple of Team Canada's that I bought and just bringing them home created a bunch of creases in the thin polyester ripstop material they use. Quote Link to comment Share on other sites More sharing options...
DucksNPucks Posted April 22, 2011 Report Share Posted April 22, 2011 ij.com beer's guy, Thanks for all the photos of folding a jersey. I was having issues with this! Quote Link to comment Share on other sites More sharing options...
Sluggermatt15 Posted May 8, 2011 Report Share Posted May 8, 2011 Mike, thanks for this thread! It is very comprehensive and helpful! Quote Link to comment Share on other sites More sharing options...
Beukeboom Posted December 11, 2011 Report Share Posted December 11, 2011 Thanks for this guide! Very helpful! Quote Link to comment Share on other sites More sharing options...
Girouxsalem Posted August 28, 2012 Report Share Posted August 28, 2012 Thanks a lot for this Mike. Every purchase I've made off Meigray has had this thread's link in the special instructions box. Quote Link to comment Share on other sites More sharing options...
LAK79 Posted April 9, 2016 Report Share Posted April 9, 2016 Mike, thanks for this thread! It is very comprehensive and helpful! http://forums.icejerseys.com/public/style_emoticons/#EMO_DIR#/thumbsup.gif Yes, five years later it's still very helpful Quote Link to comment Share on other sites More sharing options...
aschne9 Posted February 8, 2017 Report Share Posted February 8, 2017 Just wanted to thank you as well. Used and appreciated! Quote Link to comment Share on other sites More sharing options...
SoNowWhat? Posted August 5, 2017 Report Share Posted August 5, 2017 New to this board. Been lurking for a while. Hi everyone! This sort of thing is exactly why I signed up. Fantastic resource. Thank you. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.