TMLFAN Posted March 21, 2017 Report Share Posted March 21, 2017 Jagr. Then watch Guam loose his mind. Quote Link to comment Share on other sites More sharing options...
TheKevinShow Posted March 23, 2017 Author Report Share Posted March 23, 2017 On 3/21/2017 at 11:36 AM, furiousd said: Olie. Then sell it to me. I might have seriously considered that if it wasn't a replica. Quote Link to comment Share on other sites More sharing options...
rattlestar Posted March 23, 2017 Report Share Posted March 23, 2017 (edited) I just want to add onto this topic. I have a White Away 2013-2014 Bruins I want made up. Can someone confirm what type of layering I should be requesting for numbers and letters (are letters always layered?)? Thks! Edited March 23, 2017 by rattlestar Quote Link to comment Share on other sites More sharing options...
LAK74 Posted March 23, 2017 Report Share Posted March 23, 2017 If you have anyone other than Custom Crafted letter that jersey, it most likely won't be exactly like the gamers. For example, on the numbers, color is applied directly to the twill (sublimated?) and then a row of stitching is applied over the white strip to make it look like it's a separate layer of white twill, but it's not. So really, they are neither layered nor kiss-cut. Also, even though the back panel is made of stretch mesh, the gamer nameplates are airknit and don't match the underlying material they are stitched over. Quote Link to comment Share on other sites More sharing options...
TheKevinShow Posted March 23, 2017 Author Report Share Posted March 23, 2017 Did the Islanders use both As on the home jerseys for the 25th anniversary season? I found at least one picture of Palffy wearing the more stylized A but I haven't decided if I want that one or the other, or if they even wore the less stylized one on the white jerseys that season. Quote Link to comment Share on other sites More sharing options...
spudrock512 Posted March 23, 2017 Report Share Posted March 23, 2017 Yes, but from what I found, the Avalanche style 'A' was worn on the white jerseys, and the rounded 'A' is more on the blue jerseys. Quote Link to comment Share on other sites More sharing options...
rattlestar Posted March 24, 2017 Report Share Posted March 24, 2017 (edited) 11 hours ago, LAK74 said: If you have anyone other than Custom Crafted letter that jersey, it most likely won't be exactly like the gamers. For example, on the numbers, color is applied directly to the twill (sublimated?) and then a row of stitching is applied over the white strip to make it look like it's a separate layer of white twill, but it's not. So really, they are neither layered nor kiss-cut. Also, even though the back panel is made of stretch mesh, the gamer nameplates are airknit and don't match the underlying material they are stitched over. Interesting. So for the away: yellow with black layered ontop then white outlines the black with stitching applied? Do we have close up pictures of this from anyone? I guess requesting kiss cut over layered won't be any closer to appearance To what they should like? Hmmm decisions Edited March 24, 2017 by rattlestar Quote Link to comment Share on other sites More sharing options...
LAK74 Posted March 24, 2017 Report Share Posted March 24, 2017 I don't have a gamer so I'm not 100% sure, but I think the numbers are just one layer (white twill) with the gold and black sublimated onto it. If you have to choose between layered and kiss-cut, I'd choose kiss-cut, so at least the stitching pattern would look like the original (there would be no black stitching on the black part either way). Quote Link to comment Share on other sites More sharing options...
LAK74 Posted March 24, 2017 Report Share Posted March 24, 2017 Just glancing at it, it looks just like kiss-cut. But when the surface gets damaged by game wear, you can see that the colored part gets scraped off and you can see the white base twill underneath, in the 2nd picture. Quote Link to comment Share on other sites More sharing options...
rattlestar Posted March 24, 2017 Report Share Posted March 24, 2017 I see! That makes so much more sense to me now. Thanks! Just seems like a cost saving measure for them and a headache for us! ?♂️ Quote Link to comment Share on other sites More sharing options...
TheKevinShow Posted March 24, 2017 Author Report Share Posted March 24, 2017 Well, Jeremy Jacobs is the team's owner... Quote Link to comment Share on other sites More sharing options...
TheKevinShow Posted March 24, 2017 Author Report Share Posted March 24, 2017 Alright, I've settled on what I'm going to do for each jersey. Feel free to make corrections if necessary. Quote Customize my New York Islanders white jersey size XL with PALFFY #16 with alternate captain's A, semi-reverse kiss-cut with glacier twill. Add the enclosed Islanders 25th anniversary patch to the right chest, and use the serifed alternate captain's A as shown in the attached photograph. Customize my Washington Capitals black jersey size XL with JAGR #68 with alternate captain's A, semi-reverse kiss-cut with dazzle twill. Customize with the straight name bar style. Customize my St. Louis Blues blue jersey size XL with DEMITRA #38, layered with the vinyl middle layer. Customize my Nashville Predators mustard jersey size XXL with TIMONEN #44, reverse kiss-cut with glacier twill. Customize my Buffalo Sabres black jersey size XXL with HASEK #39, layered. Quote Link to comment Share on other sites More sharing options...
JoeM7392 Posted March 24, 2017 Report Share Posted March 24, 2017 24 minutes ago, TheKevinShow said: Feel free to make corrections if necessary. Isn't that your job? Quote Link to comment Share on other sites More sharing options...
mfitz804 Posted March 24, 2017 Report Share Posted March 24, 2017 30 minutes ago, TheKevinShow said: Customize my New York Islanders white jersey size XL with HITLER #69 with alternate captain's A, semi-reverse kiss-cut with glacier twill. Add the enclosed Islanders 25th anniversary patch to the right chest, and use the serifed alternate captain's A as shown in the attached photograph. Customize my Washington Capitals black jersey size XL with BIN LADEN #69 with alternate captain's A, semi-reverse kiss-cut with dazzle twill. Customize with the straight name bar style. Customize my St. Louis Blues blue jersey size XL with STALIN #69, layered with the vinyl middle layer. Customize my Nashville Predators mustard jersey size XXL with MUSSOLINI #69, reverse kiss-cut with glacier twill. Customize my Buffalo Sabres black jersey size XXL with BIEBER #69, layered. Corrections submitted. Quote Link to comment Share on other sites More sharing options...
TheKevinShow Posted April 28, 2017 Author Report Share Posted April 28, 2017 OK, I think this will just be my catch-all customization question thread so that I don't clog up the forum with more topics. What nameplate material did the Leafs use on their first 2.0s? I just bought one for cheap off of JB and I'd like to ship it off fairly quickly to SLC. Quote Link to comment Share on other sites More sharing options...
TMLFAN Posted April 29, 2017 Report Share Posted April 29, 2017 8 hours ago, TheKevinShow said: OK, I think this will just be my catch-all customization question thread so that I don't clog up the forum with more topics. What nameplate material did the Leafs use on their first 2.0s? I just bought one for cheap off of JB and I'd like to ship it off fairly quickly to SLC. Edge. Leafs always used edge Quote Link to comment Share on other sites More sharing options...
TheKevinShow Posted April 29, 2017 Author Report Share Posted April 29, 2017 14 hours ago, TMLFAN said: Edge. Leafs always used edge Thanks. Just to be on the safe side, I asked SLC to confirm that they could do the jersey with the Edge plate (I know the answer is going to be yes but I had to be certain) and I'll be shipping it off the day after I receive it. Quote Link to comment Share on other sites More sharing options...
TMLFAN Posted April 29, 2017 Report Share Posted April 29, 2017 Careful with that, Adrian has a nasty habit of calling edge plates air-knit. Could be confusing so maybe send him a picture of the edge material close up Quote Link to comment Share on other sites More sharing options...
TheKevinShow Posted April 29, 2017 Author Report Share Posted April 29, 2017 OK, thanks for the heads up. I'll send a photo of the nameplate on my white Hawks. Quote Link to comment Share on other sites More sharing options...
spudrock512 Posted May 16, 2017 Report Share Posted May 16, 2017 Can any one confirm if the 2000-07 Buffalo Sabres Alternate jerseys used stacked numbers? I looked at what I could find online with game worn jerseys, and this is what it looked like to me, but I just wanted to make sure I am correct on that assumption. Quote Link to comment Share on other sites More sharing options...
TheKevinShow Posted May 17, 2017 Author Report Share Posted May 17, 2017 10 hours ago, spudrock512 said: Can any one confirm if the 2000-07 Buffalo Sabres Alternate jerseys used stacked numbers? I looked at what I could find online with game worn jerseys, and this is what it looked like to me, but I just wanted to make sure I am correct on that assumption. I'll ask on the Sabres game worn group on Facebook. Quote Link to comment Share on other sites More sharing options...
spudrock512 Posted May 19, 2017 Report Share Posted May 19, 2017 On 5/16/2017 at 3:01 PM, spudrock512 said: Can any one confirm if the 2000-07 Buffalo Sabres Alternate jerseys used stacked numbers? I looked at what I could find online with game worn jerseys, and this is what it looked like to me, but I just wanted to make sure I am correct on that assumption. Just checking again to see if anyone can confirm how the Sabres did their numbering back then? Quote Link to comment Share on other sites More sharing options...
TheKevinShow Posted May 19, 2017 Author Report Share Posted May 19, 2017 6 hours ago, spudrock512 said: Just checking again to see if anyone can confirm how the Sabres did their numbering back then? From a user on Facebook: That's an 01-02 gamer. Quote Link to comment Share on other sites More sharing options...
spudrock512 Posted May 19, 2017 Report Share Posted May 19, 2017 That looks like stacked to me - thanks Kevin! Quote Link to comment Share on other sites More sharing options...
Energy Legs Posted June 6, 2017 Report Share Posted June 6, 2017 I want to double check what specific instructions I need to give EPS for customizing a blue Finland 2016 WCoH jersey. I think the numbers should be single-layer twill with laser-cut perforations (or is there a better name for those tiny holes?). The nameplates look like the same material as the back (stretch mesh?). Any corrections, or anything else I need to specify? Thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.